Let's talk about it below.PVC line pipeInstallation standard and method

Pvc conduit is very similar to that of a switching power supply principle for maintenance and maintenance of raw materials. Generally, the cable is turned over the pvc conduit and then the pvc conduit is solved wisely. The conduit itself has the advantages of insulating sleeve, arc prevention, fire rating self-interest, etc., and has the functions of mechanical equipment safety protection and household electrical equipment maintenance for the power lines laid on the electrical appliances within 1201v working frequency. Pushing the cable like that is not easy to cause risks even if it is electrified. And on the other hand, the application of it can not only repair and maintain everyone's life safety, but also has a very large scope of application on the maintenance, storage and arrangement of cables. Let's look at the installation method of pvc conduit below.

Installation method of pvc conduit When using fixed bracket, we generally install a fixed bracket up and down 1m, and when using fixed groove, we generally assemble support points up and down 1m.

The support point is the area where the groove is fixed again, and the spacing is set according to the groove specification and model:

1, 25mm * 20mm-25mm * 30mm model tube, a support point should have at least 2 fixed screws and arranged horizontally.

2, 25mm * 30mm model specifications model upper and lower conduit, a support point less should have 3 fixed screws, and ladder-like, that will make the conduit load-bearing plate points scattered all over.

3, in addition to the support point should be every 1m up and down drill 2 holes, with five types of twisted pair into, after the completion of the wiring, the five types of twisted pair tied out 4, the wall dark PVC line tube, line tube support point interval is generally 1m, there are two fixed methods are: immediately nail the screw into the concrete, first use the plastic expansion tube to load the screw 5, the standard, high chromium alloy hammer head main road routing method is the same, the difference is only one horizontal one vertical.

　　pvc conduitAssembly FAQ

Pvc conduit is very similar to that of a switching power supply principle for maintenance and maintenance of raw materials. Generally, the cable is turned over the pvc conduit and then the pvc conduit is solved wisely. In that way, the conduit itself has the advantages of insulating sleeve, arc prevention, fire rating self-interest, etc., and has the effects of mechanical equipment safety protection and household electrical equipment maintenance on the power lines laid in the 1201v working frequency. Pushing the cable like that is not easy to cause risks even if it is electrified. And on the other hand, the application of it can not only repair and maintain everyone's life safety, but also has a very large scope of application on the maintenance, storage and arrangement of cables.

The key to the installation method of pvc pipe line pipe is the installation method of pvc pipe line pipe. The wind is to use ball screw or supporting bridge for ceiling decoration, to use supporting overhead bridge laying outside ceiling decoration, to use fixed bracket matching fixed groove laying outside ceiling decoration, and to apply dark on the wall.